By lifekeepitup (OEM wet wipes expert) | 24 November 2020 | 0 Comments

5 Successful Measures on How to Change an Adult Diaper

The process of placing an adult diaper on someone else may be somewhat tricky, especially when you are new to that procedure. Depending upon the wearer's medical mobility, diapers might be changed while standing, sitting, or lying down. It might be most comfortable for care providers to start with your cherished one lying down for care providers new to changing adult diapers. Staying calm and respectful can help keep this a high positive, low-pressure experience. 
 
Before changing product diapers, ensure that the contact area is clean, sanitize, bacteria-free, and dry.  Wash area with soap and water and pat dry.  Or you can wipe all areas using spunlace nonwoven fabric antibacterial wet wipes.
Spunlace nonwoven fabrics are made of cotton, viscose, and polyester fiber material.  Nonwoven fibers are safe to use even for sensitive skin.
 
In case your cherished one is wearing a diaper that should be changed first, read on how to assemble and remove an adult diaper here.
Step 1: Diaper Handling
a. Fold the Diaper - Following washing your hands, fold that the diaper in on itself long manners.
b. Keep the diaper backing facing outwards.
c. Do not touch the interior of the diaper to avoid contamination.
 It is crucial if the wearer has a rash, open bedsore, or damaged skin. Gloves can be worn in this process if you prefer.
 
Step 2: Positioning
a. Move the wearer to a side place - position the wearer on their side.
b. Gently place the diaper between their legs, with the bigger diaper buttocks facing the buttocks.
c. Fan out the back end, so it completely covers the buttocks.
 
Step 3: Move the Wearer onto his\/her Back - Have the wearer roll onto his or her back, moving slowly to keep the diaper smooth and flat. Flat from that the front of that the diaper, just as you did with that the trunk. Ensure that the diaper isn't scrunched up between the legs.
 
Step 4: Secure that the Tabs on that the Diaper - After the diaper is in the right place, secure the adhesive tabs. Bottom tabs must be attached at an upward angle to match the buttocks; top tabs must be secured at a downward angle to affix the waist. Ensure that the fit is snug, but additionally ensure that the wearer is still comfortable.
 
Step 5: Adjust that the Edges for Comfort and Prevent Leaks - Run your finger around the elastic leg and crotch area, make sure all ruffles are facing outward and that the leg seal is affixed. It may assist in preventing leaks.
spunlace nonwoven fabric

Leave a Reply

Your email address will not be published.Required fields are marked. *
Name
E-mail
Content
Verification code
CATEGORIES